How to Watch Satellite TV Online Without Any Satellite Dish

Anyone can watch satellite TV online without any satellite dish system nowdays. In case you do not know, this article would show you one time-tested and another new revolutionary way to watch satellite TV on the internet without having to set up a satellite dish.

Many of the older generation grew up in an era of satellite dishes, especially for those who live in the rural areas where cable do not exist. The dishes are transmitters and together with receivers are conduits for TV signals to be displayed as visual images and pictures on our TV screens. However, they are not always pleasant. Set up can be tough and definitely not for those who are not good with their hands or have poor technical skills. Satellite dishes have grown smaller in recent years but they used to be larger than 6 foot monsters in earlier days. If that irks you, you would be relieved to know that you can watch satellite TV online just like many others without satellite dish system.

What are the hardware and PC requirements you need to set up your 'satellite-dish less' PC satellite online TV?

1. A Good PCTV Card

A PCTV card can be installed onto your computer to make your computer work like a satellite television set. Such cards come in the form of internal or external hardware. If you are familiar with the inside of a computer, then an internal card could be a good choice since they tend to be cheaper and more affordable. However, do not bother yourself when you find it too troublesome to fix it internally because there are external cards that work more like plug-and-play gadgets. They cost more and can set you back easily by a few hundreds. As long as your PC has a spare USB port, this option to watch satellite TV online is open to you.

2. PC Requirements

I would suggest you check your systems configuration before you start shopping for a PCTV card. Most cards require a minimum Pentium 3 333MHz system to run well but remember to note down the specifications like RAM, hard disk space, Operating System, etc before you head to the stores.

3. Ready Internet Connection

PCTV cards work well with both dial-up and broadband connections. However, I have a word of advice here. Dial-up transmission runs like a snail and is a really serious party spoiler. You can end up more frustrated than glad that you are watching the program. Go for broadband connection if you can afford to.

Okay, now that we have discussed about the older commonly accepted method to watch satellite TV online, we will look at another new revolutionary technique. This requires the usage of PC satellite TV software which can be downloaded easily. The setup is simple and all it takes is downloading the software and clicking a few buttons before you are ready to watch satellite TV online from more than 3000 channels. Awesome is not it?

For more information on this PC satellite TV software, do a read up at my satellite TV blog.

This article may be freely reprinted or distributed in its entity in any ezine, newsletter, blog or website. The author's name, bio and website links must remain intact and be included with every reproduction.

Posted in general | Comments Off on How to Watch Satellite TV Online Without Any Satellite Dish

Automated Real Estate Software – The New Trend in Investing

The value of real estate has appreciated in the last few years. It also shows great potential for growth. Hence, now might be the best time to look at an investment in property. However, if you’ve spoken to someone who already has his knees deep in real estate investing, you will realize that a lot of things are easier said than done.

It requires skill and experience to scour the market for high value properties.

Then comes landing good buyers.

Finally, there’s a humongous amount of paper work to handle.

This is where real estate investing softwares might lend a hand. They automate the entire process of real estate investing. If you would like to know more about such applications, here’s a low down on some of the common features they offer.

Lead generation –

At the click of a single button you are able to find a comprehensive list of buyers and sellers scattered across the country. The information elicited includes names and mail addresses of buyers, owners of properties, the type of property (bank owned, foreclosed, low and high equity, absentee owner etc.) and amount of cash paid.

Website creation –

Every business needs a website, especially if you do not have a physical location from which operate. Not all of us know the technicalities of writing HTML codes and designing a website. The real estate softwares can help you create targeted and user-friendly websites that you can use to showcase your business.

Direct mail generator –

Marketing is the soul of a real estate business. The more you network the more leads you can generate. The direct mail generator feature helps you setup a highly productive and efficient mailing system. You can send out emails, newsletters, posters and flyers.

There are a range of pre-made email templates you can use to send out messages to your leads. Autoresponders make sure you can keep in touch with sellers and buyers even when you are not physically present to answer their queries.

This feature is a highlight feature of most real estate software given that the savings in time and money are large.

Investing tips –

This is a section that most newbies can benefit from. Most applications include a resource library with info on the basic aspects of the trade. An open community of members can also give you an opportunity to interact and build your resource with real-time knowledge about making, building and closing a deal.

Diverse user base –

Modern-day automated real estate investing software applications cater to a varied group of investors. It includes those who buy, fix and flip properties. If you are a landlord, it can increase the convenience of managing your properties including finding tenants and repairing and renovating properties between subsequent deals. There are also features that rehabbers and builders of new constructions can use.

Contracts and paperwork –

Real estate investment also means a lot of paperwork. Most applications offer tools to generate contracts. Features such as auto-fill enable you to fill personal details into letters, contracts and other property-related documents. You can sign them online, and then email or fax them free of charge.

There is one thing – you need to be realistic. Real estate softwares are tools you can use to streamline your business. You should have a real estate business to start with and some basic know-how on investing.

Posted in general | Comments Off on Automated Real Estate Software – The New Trend in Investing

Strengths and Weaknesses of Waterfall Approach for Software Development

One of the most famous and widely used approaches for software development is the waterfall model. Waterfall approach is an old technique that has been in use for quite some time, but in modern times agile approach is gaining prominence.

Waterfall approach, as is evident from the name, refers to a systematic approach where one step comes after the other. It cannot go the other way round. The process works like the waterfall effect that flows in one direction, which is from up to down.

In this process the life cycle of the development process is predetermined. All the steps are defined before the start of the project. The approach is predictive, where the team is well aware of the order of each step and therefore works accordingly. It starts from the requirement analysis, the design phase and then proceeds on to the implementation, testing and the maintenance phases.

The waterfall approach can be quite beneficial for those who are quite clear on their requirements. A planned approach works for them because they want fixed processes and budget. Where fixed processes are beneficial, at the same time they can be inconvenient at times. In cases where the client is not clear on the requirements and finds in the middle of the project that he/she wants to change course, this approach can prove to be quite problematic.

Another point of the waterfall approach is that the requirement analysis and design of architectural structure can consume a lot of time. Extensive research is done initially as the next phases depend completely on the planning strategy. However, the good thing is that everything is thoroughly worked out and each aspect is studied beforehand. The developers in such cases know what is expected of them.

A waterfall approach works in a systematic order, with one step following the other and the testing phase comes in the end. If there are any big problems encountered in the testing phase, it means a long process to make the amends. The process can consume extra time and money.

We cannot conclude that one approach is better than the other, as every method would have its own strengths and weaknesses. The determination of success for each method depends on how it is being used and whether the approach suits the scope of work being undertaken. While one approach may be suitable for a particular project, it might become totally useless under different circumstances. For example, some believe that agile methods are not well suited for offshore development, as they require a closer contact and communication that is not possible in an offshore project.

Posted in general | Comments Off on Strengths and Weaknesses of Waterfall Approach for Software Development

How to Resolve “Memory Card Error” From Canon IXUS 130

Canon IXUS 130 is a sophisticated digital camera that has a resolution of 14.1 megapixels. The camera is inbuilt with almost all advanced features, including fully wide-angle 4x zoom lens and motion blur technology. The IXUS camera is compatible with SDHC (Secure Digital High Capacity) and SDXC (Secure Digital Extreme Capacity) cards, with storage capacity as high as 2TB.

Since the storage memory of the cards is huge, data loss from these cards is simultaneously huge. One of the main reasons for data loss from cards is corruption of these cards. In most cases, you receive an error message after your card gets corrupted. However, an updated backup allows you to overcome card corruption. It allows you to restore data. But in case of unavailability of backup, you can use recovery software to recover data from a corrupted card.

As a practical case, you view the below error message on Canon IXUS 130 while attempting to view some previously stored photos on your SDHC card:

“Memory Card Error”

Every single photo saved in the memory card becomes inaccessible after the above error message appears. In addition, no more photo can be saved on card. In short, the card can not be read or written upon.

Cause:

The above error message that makes all the photos inaccessible is primarily caused due to corruption of card. Few reasons that are accountable for the above error message are virus infection, interrupted read/write operation, and human errors.

Resolution:

The resolution for the above error message is formatting of memory card in the camera itself. The process deletes all the previously saved data and allows you to save new data. While formatting proves a good resolution for users who do not require the old data, it becomes fatal for users, like photographers, detective agents, etc, who save critical data in their memory card. However, recovering formatted data now-a-days is an easy process. To do so, you need to use an advanced third-party Photo Recovery Software. A Image Recovery tool is readily available on the Internet by just one single click.

Posted in general | Comments Off on How to Resolve “Memory Card Error” From Canon IXUS 130

What Is The Difference Between ERP And Enterprise System?

Enterprise system and Enterprise Resource Planning System terms are similar but there is difference between an enterprise system and an ERP system. An ES or enterprise system is a large scale system which includes packages like ERP and CRM. ERP is a subset of Enterprise System or it can be said that ES is a superset of ERP. It contains a variety of solutions. ES contains applications and packaged solutions which can be directly used in an enterprise. On the other hand ERP system is the automation of the business processes and the solutions are in the form of modules which are designed according to the client’s requirements.

The functions are customized according to the client’s business environment. Enterprise system does not include architecture of other solutions whereas an ERP implementation automates systems using technical aspects. ERP system includes architectures and databases and is client server architecture. The system is server based therefore the consultant needs to be aware of the technical aspect too.

Another difference between an ES and an ERP system is that the ERP is aimed at improving the functionalities of the organization whereas the ES helps to improve the overall maintenance and accuracy. It provides for better solutions and aids in decision making. ES is difficult to implement compared to Enterprise resource planning and even the timeframe needed for implementation maybe more. The overall impact is high but so are the risks involved. If the ES is not implemented in the right manner, it can cause business failure and if implemented properly it can increase the efficiency and profits of the business organization. It is normally required when there is a big drawback in the current procedures and methodologies in the organization and need to be corrected. The company going in for enterprise system needs to be careful while choosing the software and the vendors due to the risk of failure involved.

The difference between an enterprise system and an ERP system is that ERP is mostly used for medium scale companies to big companies and ES is restricted to the big companies. There are many complex functions involved in big companies which cannot be provided solutions for alone by ERP. The role of ERP is restricted when compared to enterprise system because it does not include customer relationship or vendor management.

These applications are needed when the business process is complex and on a big scale. Therefore bigger organizations need to go with ES instead of enterprise resource planning alone. ERP is also an important system to streamline the internal processes but it does not provide for taking care of the external processes. Enterprise system takes care of the end to end business process of organization since it involves other applications also like SCM and CRM. There is quite a lot of difference between an enterprise system and an ERP and it depends on the company whether it wants to go with an ES to streamline the entire process starting from supplying, production and customer or whether he wants to go with an ERP system to streamline the internal process.

Posted in general | Comments Off on What Is The Difference Between ERP And Enterprise System?

Why Computer Hardware Is Important

In this day and age, it is hard to deny the influence of technology in our lives. We live in an era where pretty much is automated and computerized. And amidst all the technological advancement that humankind has achieved, one important device has been created that will only sure to become more relevant to our lives as technology progresses, the computer. No one can deny that computers are now an essential part of our lives, the same way a cell phone and television does. It is safe to say that in this day and age, having no computer would be an inconvenience. Which is why it is important that we know the way our computer works so that we would be aware of the things that we should do in case it stops working. The hardware of the computer is considered to be the most important because without it, it will simply not work.

Simply put if you know how to handle the hardware of a computer and know each of their function for the unit, then you can easily determine what the problem is in case the unit stops functioning. In order to be familiar with basic computer troubleshooting, then you also need to be familiar with computer hardware. A good example of this is the memory of the computer (RAM). All programs and applications that are ran in a computer needs memory. Without RAM it simply will not function. Aside from that, even if you have a RAM but it does have the specifications to keep up with the programs that are being run, then the operation would have slowed down to a crawl. So when it comes to computer hardware, you have to make sure that it is not obsolete, so you need to upgrade depending on what sort of program that you are usually using.

When handling computer hardware, you have to keep in mind some safety measures so you can manipulate the unit safely. Before opening any computer cases, you have to make sure that the unit is unplugged or you might risk electrocution or shocks. While checking your hardware components, always check for damaged parts because that is most likely the one that is causing problems. When inserting components and parts, you have to remember that if it does not fit, then most likely you are inserting it on the wrong slot. If it does not fit, then do not force it or you will risk breaking the component. Before touching any parts inside the unit, make sure that you discharge yourself first by through a grounded metal object or you can use an anti-static wrist strap or mat which is sold in stores for cheap.

By knowing and analyzing every computer hardware part you will know about its importance and if it ever breaks down then you can perform the proper troubleshooting steps. Every hardware component is important for the computer's operation. The performance of your computer largely depends on how good your hardware is, so be sure that they are always in good working condition.

Posted in general | Comments Off on Why Computer Hardware Is Important

How to Uninstall and Remove G DATA Antivirus Completely

G DATA Antivirus is a complete protection solution for your home computer. However, no matter the reason is that corrupt virus signatures may have caused it not to upgrade properly, it will not work regularly and needs to be repaired, or probably corrupt files are causing 100% CPU usage, etc. Like all other antivirus software, there also may be times when you have to uninstall and remove G DATA Antivirus.

The standard method of uninstalling G DATA Antivirus is from Windows built-in Add / Remove Programs, but sometimes the removal process will hang and you may be unable to remove this program from your computer, because some registry entries and spaces may still be left in Your system. In this case, if you wish to completely remove this antivirus, you have to delete all those sticky registry entries, processes, services, as well as related folders and files.

Removing all instances of this antivirus program can be extremely tricky and there is a risk of damaging the operating system if not done properly. Then you can try using a good removal tool to help you remove this program automatically in seconds. Perfect Uninstaller is one of such software. It works in a very simple manner. Aside from working to remove G DATA Antivirus, it can also get rid of other unwanted programs from your computer.

1. It offers a much quicker and easier way to completely remove programs which can not be removed through "Add / Remove Programs".
2. It completely deletes empty or corrupt registry entries.
3. It has the "force uninstall" function to forcibly uninstall corrupted or hidden programs.
4. It has the "Special Uninstall" function designed for some very specific programs in that list
5. It can restore the registry to a previous state, and restore files from the recycle bin (files deleted into the recycle bin).

Uninstall and remove G DATA Antivirus from your system before proceeding with the installation of the next antivirus that you would like to set up, otherwise the antivirus will conflict and give much trouble that you will not be able to recover Windows from the crash.

Posted in general | Comments Off on How to Uninstall and Remove G DATA Antivirus Completely

Corel DRAW – Best Desktop Publishing Software

Corel DRAW is a supreme supplier of graphics software, including the popular Corel DRAW program. Corel DRAW has tools that allow the user to both create and edit images. The type of desktop publishing tools that you use will depend on the type of project. For more information and assistance, use the Corel website.

Corel DRAW is the best Desktop publishing software that empowers users to create illustrations containing graphics, text and photographs. Corel has an extensive range of tools which enable the user to edit any shape or character with ease and precision, fit text to curves and create custom color separations. It is developed and marketed by Corporation of Ottawa. This tool can open files: Adobe PageMaker, Microsoft Publisher and Word, and other programs can print documents to Adobe PDF using the Writer printer driver, which such software can then open and edit every aspect of the original layout and design.

Several innovations to vector-based illustration originated with Corel: a node-edit tool that operates differently on different objects, fit text-to-path, stroke-before-fill, quick fill/stroke color selection palettes, perspective projections, mesh fills and complex gradient fills.

One of this software’s many strengths is the huge range of over 1,000 fonts that it comes with, provided in both TrueType and Postscript Type 1 format. Corel differentiates itself from its opponent in a number of ways: The first is its positioning as a graphics suite, rather than just a vector graphics program. A full range of editing tools allow the user to adjust contrast, color balance, change the format from RGB to CMYK, add special effects such as vignettes and special borders to bitmaps. Bitmaps can also be edited more extensively using Corel PhotoPaint, opening the bitmap directly from Corel and returning to the program after saving. It also allows a laser to cut out any drawings.

Expert believed it was the first of the Windows-based drawing programs and has built on this early start to become far-and-away the dominant drawing package on the PC. Its biggest strength – and its biggest potential limitation – is its all-encompassing approach. In the past this has led to accusations of unfocused bloating, but with version 7.0 Corel has addressed the criticisms with a far tighter and better rationalized program. Even so, there’s a huge range of functionality to cover.

Corel DRAW Download was originally developed for Microsoft Windows and currently runs on Windows XP, Windows Vista, and Windows 7. The current version, X5, was released on 23 February 2010.

Posted in general | Comments Off on Corel DRAW – Best Desktop Publishing Software

How to Repair DBF Files by Using DBF Recovery Software

As a computer user you must have heard about a DBF file or some of you have used it. DBF is a database file format used by various database software programs, such as: Visual FoxPro, Clipper, dbFast, CodeBase, MultiBase, dbXL, Arago and similar database programs. A database file is a collection of data organized in a tabular form. A DBF file can be easily opened, edited and saved by any of these database programs therefore, this file format is very popular among computer users.

The most common use of a database file is to store a large amount of data and information. The file is widely used in almost every sector, such as: corporate and educational sectors to store the data and information. It has become an essential file format for an individual and an organization.

Where this file format is very useful for users on the other hand, it may create some serious problems as well. Sometimes a DBF file may become inaccessible or invalid due to corruption. DBF is not immune to corruption; in fact, this file format is prone to corruption due to its large size and complex file structure. It might be easily corrupted due to various reasons, such as: virus attacks, malfunction in database application, hard disk drive failure, software collision, unexpected cancellation of DBF, human errors and many more. These are some common reasons which can play an important role in database file corruption.

While opening a corrupt DBF file you may receive some error messages something like these:

  • “File .dbf does not exist”.
  • “The fields in table did not match the entries in the database”.
  • “Access to table disabled due to previous error”.
  • “Database file appears corrupt: Page is of wrong type.
  • “Corrupt table”/ “index header”.
  • “Filename .dbf has become corrupted”.

These are some common errors which frequently take place at the time of corruption. For example: you are working on your DBF file, everything is fine. But all of a sudden your database application (Visual FoxPro or other) starts hanging. You have no other option other than restarting the system. But when you restart your system and open the same DBF file, in which you were working earlier, it does not open or you get an error message saying the file is corrupted or damaged. This must be very frustrating situation for any user since all the hard work will go into the vain. All the data and information stored in the file might be lost forever. You have to re-create the file, which might not be possible in some cases.

In such critical state a BKF file will definitely help you. If you have backed up the database file (which is now corrupted), then you can easily restore it from the BKF file. But sometimes the BKF file may not be available or corrupted or invalid. In this situation you can use third-party DBF recovery software. This is one of the most efficient and effective solutions to fix corrupt DBF files. The DBF recovery software is designed to repair an extremely corrupted DBF file and to restore maximum data from it. It is highly capable to resolve or fix all the errors from corrupted DBF files. The software supports all popular database applications, such as: dBase III, dBase IV, dBase V, Visual FoxPro, Clipper, dBFast, CodeBase, MultiBase, dBXL and Arago. The best feature of the software is its self-describing user interface. It requires no technical knowledge or skills to use this software. Any tech savvy and a novice user can easily and comfortably use this software to repair corrupted DBF files. The DBF Recovery software is available with free demo version. Users can download the demo version before buying the full software. This helps users to examine the features and performance.

Posted in general | Comments Off on How to Repair DBF Files by Using DBF Recovery Software

Review of Takeoff Software for Estimating Construction

So often people want to rush out and buy estimating software or takeoff software without first trying to define their internal estimating processes. Once the estimating process is clearly defined, then and only then, can you actually try to compartmentalize the process into segments. So often the segment is really quantity takeoff. Takeoff of what you may wonder? That is like the million dollar question. This article will speak about the takeoff software process which usually associated with estimating software processes. The takeoff software process can often be takeoff of materials for some folks, and to many others, the takeoff process of scoped systems to create estimates or proposals. This review or comparison will not try to explain the estimating software process but bring to you valid quantity takeoff thinking among estimators in a quest to find which product thinks the way you do. These are the opinions of the author.

I will review and compare 3 types of measuring takeoff products:

It is extremely important to note that these are ONLY measuring takeoff programs, NOT estimating programs.

1) Planswift

2) On-Screen Takeoff by On Center Software

3) Electronic Plan Takeoff Software

All three products have their strengths, however, Planswift and On-Screen Takeoff are stand-alone products and Electronic Plan Takeoff is actually dynamically integrated live with Microsoft Excel which means that it starts and finishes and saves in Excel. They all integrate with Excel, however, you will have to evaluate your thought process and decide which of the three products work-flow think along the lines of how you think. For instance, what is the first thing you do when you get a set of plans? Typically, you start flipping through the plans to see how involved the project is and what type of work do you see that is attractive for your company. Then when you decide you are going to estimate this job, more often than not, you start like 80% of companies in the world of construction estimating by opening your takeoff master template Excel spreadsheet. You rename your spreadsheet to the new job or project and off you go performing takeoff. This is where the differences are:

In Planswift, you decide what drawing you are on and then you perform the measuring of an item you want to perform takeoff on the plan. Unfortunately, that is not exactly how an estimator thinks. Planswift does give you the ability to add a type of takeoff item on the fly by naming it and then perform takeoff of it; somewhat of a very manual and slow process. They also provide you with the ability of applying a type of assembly to a takeoff to aggregate quantities of items in that assembly. Not quite the way an estimator thinks. It forces you to jump to different screens which slows down the process. Typically, the main start of anyone’s takeoff process, or some may think of it as a checklist approach, is to start with your own spreadsheet of YOUR items. Those items can be material items or can be scoped assembly system items. Either way, by starting with a master spreadsheet say in Excel for example, many estimators think of this as a risk reducer, not to forget things they normally takeoff. Being that Planswift is a stand-alone takeoff program, it typically saves your takeoff images in Planswift instead of your estimate in Excel, if Excel is your estimating system. If you are using Excel, you have to manually save your takeoff measurement numbers in Excel and your takeoff images in Planswift or elsewhere, just not in Excel where the takeoff quantity resides. Again, if you want to integrate with Excel, they force you to either export or import takeoff items from Excel rather than being dynamically integrated live to Excel. They do however have the ability to dump the measured quantity from Planswift into any Excel spreadsheet or Word document. The main purpose or the primary focus of this program is measuring, therefore it does a good job at that function. Most of the other functions require you to jump around different screens, and essentially, you loose your thought of where you are. There are some features that attempt to address the estimating process, however, there are many features that are missing for Planswift to be a full fledged estimating system; it is NOT one. Planswift does integrate with the leading estimating system Sage Timberline, but the integration is weak. Since Timberline’s power is in assembly takeoff and where most estimators reside in Timberline, Planswift does not give the estimator the ability to add quantities of miscellaneous Timberline items or one-time items that need to added on the fly to an assembly while they are in Planswift at the Timberline interview screen, and while being in the measuring phase. Planswift does allow the deleting of assembly generated items as well adjusting assembly item quantities in a different screen. Again, to perform all that, you are forced to jump around to different screens. No assembly is ever perfect in any estimating system since project conditions are always uniquely different, therefore, having to add items to an assembly is extremely important. That adding of items and associated quantities is an absolute requirement any estimator typically has to do during the takeoff measuring and estimating phase; something that Planswift struggles with as related to Timberline Estimating. Planswift does allow the direct send of measurements to Timberline Estimating items and assemblies while in Timberline Estimating, just as you would do with the old digitizer measuring boards. Training, support and maintenance are extra for Planswift. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

On Center’s On-Screen Takeoff is the Grand Daddy of software takeoff products due to the fact that it has been around the longest. On Center recognizes that On-Screen Takeoff is primarily a measuring program. That is why they have a separate estimating program named QuickBid for those who want an estimating program. On Center does not try to trick you into thinking it is an estimating system. In On-Screen Takeoff, you also decide what drawing you are on and then you perform the measuring of the plan. BUT, before you start, you can load a master set styles of things you typically takeoff or measure from your own library. That process seems to be less complicated than that of Planswift. On-Screen Takeoff does give you the ability to add a type of takeoff item on the fly by naming it and then performing takeoff of it; somewhat of a manual and slow process as well. The program does come with many features that are primarily focused on simple measuring to advanced measuring issues all with attention to detail regarding easy navigation for the takeoff process. On Center does a very good job at that. However, there seems to be a disconnect of thought from an Excel spreadsheet items you may use for estimating and/or proposals. The integration to Microsoft Excel is not a dynamic live link, more like an after thought in my opinion. Yes, you can establish links to named styles to cells or ranges in Excel, somewhat rigid. But the question you will have to ask yourself, which will happen more often than not is: What do you do when you need to add things on the fly during takeoff and in an Excel spreadsheet? Again there will be manual associations you will have to establish with Excel which is another major slowdown. You have to manually save your takeoff measurement numbers in Excel and your takeoff images in On-Screen or anywhere you decide, except the takeoff images will not be saved in Excel where the takeoff quantity resides. This type of situation arises when a takeoff program is a stand-alone program. On Center’s On-Screen Takeoff has the best integration with the most widely used estimating system in the USA: Sage Timberline Estimating. It basically mimics the same interview process as you would do with the old digitizer measuring boards. By working directly with Timberline, On-Screen Takeoff allows the estimator to perform takeoff of a Timberline variable question and immediately returns back directly with the takeoff quantity in a Timberline assembly at the variable question. By virtue of this process, On-Screen Takeoff allows the estimator to continue his/her Timberline interview process in Sage Timberline Estimating by reviewing/massaging generated quantities, or adding items in a Timberline assembly as the estimator see fit. That workflow process gives full control to the estimator, good job On Center. Training, support and maintenance are extra for On-Screen Takeoff. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

This next system is ONLY if your estimating system or proposal generator is Microsoft Excel. Electronic Plan Takeoff Software is a plug-in for Excel. You start your spreadsheet, you perform the measuring takeoff, you may even add some more items on the fly all the while you are in the measuring phase in the Electronic Plan Takeoff program. When you are done, even if you added items on the fly, they automatically appear in your Excel spreadsheet. Excel is the control of everything. Your project is started in Excel, your takeoff is saved in Excel, the estimate or proposal is/can be produced there in Excel; one program, one place. Many takeoff programs interface with Excel somehow, but only Electronic Plan Takeoff is live linked with Excel, meaning all your Excel spreadsheet descriptions appear in the measuring takeoff program so you always know where you are in Excel. That is a huge difference in comparison to Planswift and On-Screen Takeoff. You can even change a description of a takeoff item in Electronic Plan Takeoff and it is automatically changed live, in your Excel spreadsheet. When you talk about the estimating and takeoff phase you must keep processes cleans and easy and this program does just that. There is no getting lost in this program. Just like the other reviewed programs above, the central focus of this program is takeoff measuring, and it does a GREAT job at that. The navigation within the program is really simple and easy. It is not made to work with other estimating systems, but there is a version that allows the direct send of measurements to any Microsoft Windows program awaiting a keyboard entry, just as you would do with digitizer measuring boards. There is also a version that works with digitizer boards as well. If you use Microsoft Excel for estimating, or takeoffs, or proposals, then this Electronic Plan Takeoff program for Excel would be your best choice. The integration to Excel is unmatched in Electronic Plan Takeoff compared to Planswift or On-Screen Takeoff. What is quite different in Electronic Plan Takeoff is that training, support, and maintenance are INCLUDED with a purchase, whereas training, support and maintenance are extra for Planswift and On-Screen Takeoff. Moreover, annual support and maintenance for Electronic Plan Takeoff year two and beyond is a low fee per company per year, instead of per license. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

Microsoft and Excel are registered trademarks of Microsoft Corporation. Planswift is the registered trademark of Tech Unlimited, Inc. On-Screen Takeoff and QuickBid are registered trademarks of On Center Software, Inc. Sage Timberline Office, Sage Timberline Estimating are registered trademarks of Sage Software, Inc.

Posted in general | Comments Off on Review of Takeoff Software for Estimating Construction